Plugin the USB to Serial Adapter
If your Touchscreen is already wall mounted, it will need to be removed from the wall in order to proceed
Plug the USB to serial adapter into the USB slot on the back of the Touchscreen.
Remove the black Serial cable from the box containing the scales. Plug the black serial cable into one of the USB to serial adapter slots. Ensure the connection is secure by tightening the screw fixtures.
Plug the other end of the cable into the scales.
Insert the power cable into the scales and the other end into the power socket.
On the underside of scales, ensure the Mode selected is Scale.
The scales can be turned on by pressing the green On/Off button
Blood Pressure machine setup
Plug the grey serial cable into an available slot of the USB to serial adapter. Ensure the connection is secure by tightening the screw fixtures.
Plug the other end of the grey serial cable into the back of the Blood Pressure machine. Again, ensure the connection is secure by tightening the screw fixtures.
Plug the included power cable into the AC Input slot and plug the other end into the power socket.
The power button for the Blood Pressure Machine is also located on the back.
After ensuring all cabling is securely in place, both Blood Pressure machine and scales are switched on you can turn the Touchscreen on, by pressing the red button underneath.
The Touchscreen (if not yet configured) will display an Engage deployment status screen. We want to see Scales and Monitor showing as Found on COM3/4.
Do not press the Done button. Phone Engage Health support on 01263 834648 who will finish configuration remotely.