After installing your new Engage Arrive Andriod screen, if you're not connecting it to an Ethernet connection you'll need to follow the steps below to join it to your Wifi network
Accessing the settings
First tap a few times on the very bottom right hand corner of the screen
You'll then see a pop up asking for a PIN, enter the code 0000 and tap enter, this will take you to the StarOS home page
Tap the "SYSTEM" icon to access the device settings menu
In the Settings menu tap "Network & Internet" to access the network setup menu
From the "Network & Internet" menu tap on "Internet"
In the "Internet" menu tap the toggle switch to turn on the wifi
With the wifi toggled on, the screen will automatically scan for available wifi networks and display a list of available networks.
Tap on the network you wish to connect to
Tap the password box to bring up the on screen keyboard
After entering the password tap "Connect"
The screen will load up the Network Details page, and if the password is correct will show "connected" under the network name, once that's appeared, tap the circle at the bottom to return to the home page.
Once back on the home page, simply tap "LAUNCH NOW" to load up the check in page.
When Engage Arrive loads, you'll be shown a code to imput into your Management Console, for details on setting up the screen, see our guide HERE
